全國咨詢服務電話
客戶至上
電話：15378180513
聯系人：
官網：http://byzgrb.cn
配置步驟
1、首先升級擴展boot版本，要求boot版本必須為對應版本配套的7.18版本，版本文件中可獲取
啟動后Ctrl+B進入bootware，選擇7進入bootware操作子菜單
選擇4設置更新bootware方式通過網線
選擇4設置上傳配置
設置上傳文件名，此處是更新bootware，需上傳boot文件;設置IP地址
====================================================
|Note: "." = Clear field. |
| "-" = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wa5300.ipe
:apwa5300_v7.18.btw
Target File Name :wa5300.ipe
:apwa5300_v7.18.btw
Server IP Address :192.168.0.99 10.0.0.233
Local IP Address :192.168.0.98 10.0.0.2
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
選擇1更新bootware
Enter your choice(0-4): 1
Loading...........................Done.
1233920 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare.....Done.
Updating Extended BootWare? [Y/N]Y
Updating Extended BootWare.........Done.
更新完成后選擇0退回主界面并reboot
Enter your choice(0-4): 0
Enter your choice(0-4): 0
重啟完成后查看bootwre版本為7.18，再次Ctrl+B進入bootware，Ctrl+F格式化flash，此處注意需要格式化，避免空間不足導致版本解壓失敗
****************************************************************************
* *
* H3C WA5320 BootWare, Version 7.18 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Mar 8 2019
CPU Type : ARM
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 710MHz
Memory Type : DDR3 SDRAM
Memory Size : 256MB
Memory Speed : 533MHz
Flash Size : 32MB
PCB Version : Ver.B
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7>BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....
............................................................................
..................
Format success.
格式化完成后選擇3進入ethernet子菜單
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7>BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3
選5設置有線網絡配置，上傳之前需要把胖AP版本文件名改成wa5300-oasis.ipe
====================================================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-5): 5
====================================================
|Note: "." = Clear field. |
| "-" = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :apwa5300_v7.18.btw
:wa5300-oasis.ipe
Target File Name :apwa5300_v7.18.btw
:wa5300-oasis.ipe
Server IP Address :10.0.0.233
Local IP Address :10.0.0.2
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
配置完成后選擇2，更新主版本文件
====================================================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-5): 2
Loading.....................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
..............Done.
27445248 bytes downloaded!
Image file wa5300-oasis-boot.bin is self-decompressing...
Saving file flash:/wa5300-oasis-boot.bin ...................................
.............................Done.
Image file wa5300-oasis-system.bin is self-decompressing...
Saving file flash:/wa5300-oasis-system.bin .................................
............................................................................
............................................................................
............................................................................
............................................................................
...........................Done.
升級完成后選擇0退回主界面并且reboot
====================================================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-5): 0
====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7>BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing.................................
.Done.
****************************************************************************
* *
* H3C WA5320 BootWare, Version 7.18 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Mar 8 2019
CPU Type : ARM
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 710MHz
Memory Type : DDR3 SDRAM
Memory Size : 256MB
Memory Speed : 533MHz
Flash Size : 32MB
PCB Version : Ver.B
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/wa5300-oasis-system.bin.................................
............................................................................
...........................................................................
Done.
Loading file flash:/wa5300-oasis-boot.bin...................................
Done.
Image file flash:/wa5300-oasis-boot.bin is self-decompressing...............
............................................................................
............................................................................
............................................................................
............................................................................
...............................Done.
System image is starting...
Startup configuration file doesn"t exist or is invalid.
Line con0 is available.
Press ENTER to get started.
至此設備啟動完成
配置關鍵點
1.需要升級設備bootware版本至7.18
2.升級完bootware后需要格式化Flash
3.對應版本文件需要修改成wa5300-oasis.ipe
云AP是Fat AP。初次使用云AP，給云AP上電后，云AP會默認開啟4個無線服務：
l 其中一個稱之為管理WIFI，也稱內部WIFI，SSID為H3C_XXXXXX，XXXXXX為設備mac地址后六位。管理WIFI供商鋪內部員工管理使用，一般在2.4G頻段工作，當設備未連接到綠洲時，通過連接管理WIFI在瀏覽器輸入10.40.94.1或myap.h3c.com訪問本地web頁面可進行本設備下的無線服務管理配置，一旦連接上綠洲，將只能通過綠洲平臺進行統一的無線服務配置管理。
其余3個稱為用戶WIFI，也稱商業WIFI，SSID為H3C_WiFi_1、H3C_WiFi_2、H3C_WiFi_3，不加密，不認證，不隱藏。當設備連接到外網，可為已經連接上用戶WIFI的用戶提供上網服務。
成都市武候區人民南路4段53號嘉云臺丙棟7樓
掃一掃，加微信Copyright ? 2024 達銳斯科技 川公網安備 51010802000119號
XML地圖
蜀ICP備2020034250號-1 技術支持： 網站模板