全國咨詢服務電話
客戶至上
電話：15378180513
聯系人：
官網：http://byzgrb.cn
WX3000E系列AC，用命令oap connect slot 0 切換至交換板的密碼忘記了，telnet登陸交換板的密碼也忘記了，可以采取跳過AC板跟交換板的配置重新啟動來修改配置解決。
一、wx3000
3000(3010、3024、3008)交換側與無線側共用忽略配置啟動標志。
重啟設備，ctrl+b進入bootware菜單選擇6忽略配置，兩側同時忽略。
二、wx3000E(3010e、3024e):
1.ac側，端口1配置成shutdown
[H3C]interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1]shutdown
2. ac側，保持配置
3. 重啟設備
4. 重啟后，由于端口1是down的，交換側獲取不到版本一起在request狀態，o c s 0登錄交換側應該是下面的這個態
Press CTRL+K to quit.
Connected to OAP.
Request File:
Request File:
Request File:
Request File:
Request File:
Request File:
Request File:
Request File:
Request File:
Request timer out!
System restart now
Starting......
<----- 5. 交換側長時間獲取不到版本會重啟本側，等待啟動時ctrl+b進入bootware，選6 skip配置，然后選0，重啟交換側Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.......Done!
****************************************************************************
* *
* H3C WX3010E-LSW BootWare, Version 2.00 *
* *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jan 8 2013
CPU Type : 98DXH325
CPU L1 Cache : 32KB
CPU Clock Speed : 333MHz
Memory Type : DDR2 SDRAM
Memory Size : 128MB
Flash Size : 16MB
CPLD Version : 002
PCB Version : Ver.C
Mac Address : 5CDD7035C775
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
=====================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 6
===============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
======================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): 0
Starting......
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing.......Done!
......
6. ctrl+k退回到無線側，將端口1，undo shutdown，交換側開始獲取版本并跳過配置啟動;
Copyright ? 2024 達銳斯科技 川公網安備 51010802000119號
XML地圖
蜀ICP備2020034250號-1 技術支持： 網站模板